Cleaning And Maintenance; Removing; Washing Instructions - Kindcomfort KT012 Instructions For Use Manual

6. CLEANING AND MAINTENANCE

Removing

1. The cover of the safety seat must be removed for washing, first
loosen the metal connector harness straps
from the front of the seat pull the harness straps towards you
removing them from the seat grooves (6.3 and 6.4).
2. Unbutton the push buttons that are on both sides of the child
safety seat (6.5).
3. Carefully remove the seat cover (6.6).
Cleaning the seat
1. Wash the straps and plastic parts with neutral detergent and
warm water.
2. Ensure that no soap enters the buckle or metal parts.
3. Do not use chemicals or bleach on any part of the chair.
4. Dry thoroughly before use.
If you have any question about using or installing this product, or if you
need a spare part contact our Customer Service.
Group 0+/1/2

WASHING INSTRUCTIONS:

· The cover is removable and washable at 30º.
Dry in the fresh air only.
· Wash in washing machine (cold).
· Do not use bleach.
· Dry clean, with any solvent except
trichloroethylene.
· Do not use dryer.
· Do not iron.
O (6.1 and 6.2). Then
www.kindcomfort.com
EN
27