Seat Parts And Fittings; Installing Child Seat. Group 0+ - Kindcomfort KT012 Instructions For Use Manual

2. SEAT PARTS AND FITTINGS

A. Cover.
B. Group 1 and 2 vertical belt hook.
C. Harness pads.
D. Vertical belt hook.
E. Armrest.
F. Group 0+ diagonal belt hook.
G. Harness straps.
H. Locking buckle.
I. Buckle pad.
J. Ergo seat cushion for group 0+ & 1.
K. Base Cover.
L. Harness adjustment button.
M. Harness adjuster strap.
N. Child seat gradient adjuster.
O. Harness pad connector.
P. User manual´s poquet.
Q. Metal harness connector.

3. INSTALLING CHILD SEAT. GROUP 0+.

WARNING
Do not use the child seat on a passenger seat fitted with an active
airbag.
1. Recline the seat as much as possible using handle
back in position 1 (3.1).
2. Open the harness system by pressing
seat buckle (3.2).
3. Remove the inner cushion but keep it handy to later put in place
(3.3).
4. Place the child seat on the vehicle seat facing backwards (3.4).
5. Lift the rear of the base cover, and pass the waist seat belt beneath
it passing through
point until you hear a "click" (3.5).
6. Pass the diagonal vehicle shoulder belt through guide
3.7).
Group 0+/1/2
Only suitable for Group 0+, approx.
F guides and buckling it to the vehicle anchor
0 to 10 months (0-13 Kg.)
N
H the red button on the child
www.kindcomfort.com
EN
placing the
D (3.6 and
23