Hammond B-3 Owner's Playing Manual page 67

3. Touch the PARAM " " Select Touch Button once. The Information Center
Display should now look similar to this:
Notice that the legend underneath the word LOW is flashing "on" and "off."
4. Now select the Fold Back settings you want by doing the following:
Use the PARAM Select Touch Buttons to move between "LOW" and "HIGH."
The "LOW" parameter represents the range of the Drawbar marked "16',"
and can be set from "1C" through "2C," while the "HIGH" parameter
represents the range of the Drawbar marked "1'," and can be set from "4G"
through "5C."
Use the VALUE "-" Select Touch Button to decrease the numbers.
Use the VALUE "+" Select Touch Button to increase the numbers.
The data chart below shows the options that you may select. The default settings are the
same as the Hammond Models B-3, C-3, RT-3, and A-100: 16' Drawbar at "C2" and the 1'
Drawbar at "4G."
MANUAL
SWELL
GREAT
NOTE: You can exit by touching the MENU / EXIT Select Touch Button.
16' RANGE
1C-2C
1C-2C
HA<O> ORGAN New B-3 / New C-3
I N F O R M A T I O N C E N T E R
1' RANGE
4G-5C
4G-5C
Owner's Playing Guide
57