Hammond B-3 Owner's Playing Manual page 125

3. Touch the Number 1 Select Touch Button to select the EX.ZONE Menu:
4. Touch the PARAM "
Display should now look similar to this:
Notice that the legend just under the word LO is flashing "on" and "off."
5. Now select the Zone range for each Part by doing the following:
Use the PAGE Select Touch Buttons to make your Manual, Pedal and Part
selections ("SWELL 1," "SWELL 2," "SWELL 3," "GREAT 1," "GREAT 2,"
"GREAT 3" or "PEDAL 1," "PEDAL 2" and "PEDAL 3").
Use the PARAM Select Touch Buttons to move between "LO" and "HI." "LO"
represents the lowest note playable by the selected Part, while "HI" represents the
highest note playable by the selected Part.
Use the VALUE "-" Select Touch Button to set the Zone range lower.
Use the VALUE "+" Select Touch Button to set the Zone range higher.
The data chart below shows the options that you may select.
NOTE: You can exit by touching the MENU / EXIT Select Touch Button.
" Select Touch Button ten times. The Information Center
EX.ZONE - All Parts
1C ~ 6C
HA<O> ORGAN New B-3 / New C-3
M I D I 115
Owner's Playing Guide