Hammond B-3 Owner's Playing Manual page 119

3. Touch the Number 1 Select Touch Button to select the EX.ZONE Menu:
Notice that the word ON is flashing "on" and "off."
4. Touch the PARAM "
Display should now look similar to this:
Notice that the legend just underneath the word OCT is flashing "on" and "off."
5. Now select the Octave setting for each Part by doing the following:
Use the PAGE Select Touch Buttons to make your Manual, Pedal and Part
selections ("SWELL 1," "SWELL 2," "SWELL 3," "GREAT 1," "GREAT 2,"
"GREAT 3" or "PEDAL 1," "PEDAL 2" and "PEDAL 3").
Use the VALUE "-" Select Touch Button to lower the Octave setting for the
selected Part.
Use the VALUE "+" Select Touch Button to raise the Octave setting for the
selected Part.
The data chart below shows the options that you may select.
-2 (two octaves lower) ~ 0 ~ +2 (two octaves higher)
NOTE: You can exit by touching the MENU / EXIT Select Touch Button.
" Select Touch Button six times. The Information Center
EX.ZONE OCTAVE - All Parts
HA<O> ORGAN New B-3 / New C-3
M I D I 109
Owner's Playing Guide