Powering The Flash - Bolt VB-11 User Manual

Powering the Flash

The Bolt VB-Series flash units are powered by an external power pack, such as the Bolt PP-400DR, with a high
voltage cable via a dedicated port on the side of the flash body. The external power source is sold separately.
Connecting to a power pack:
1. Ensure the power pack and flash unit are turned off.
2. Insert one end of the high voltage power cable into the output socket of the power pack, and plug the
other end into the power socket of the flash.
3. Turn on the power pack, and then press the Power button on the flash.
NOTE: Certain power packs, such as the Bolt PP-400DR, will automatically turn the flash on when powered on.
|
14 Powering the Flash