Configure Wpa (Radius) - eHome EH100 User Manual

Section  - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on Wireless Settings on the left
side.
2. Next to Security Mode, select Enable
WPA-Personal Security or Enable
WPA2-Personal Security.
3. Next to Cipher Mode, select TKIP, AES, or
Auto.
4. Next to PSK/EAP, select EAP.
5. Next to RADIUS Server 1 enter the IP
Address of your RADIUS server.
6. Next to Port, enter the port you are using
with your RADIUS server. 1812 is the default
port.
7. Next to Shared Secret, enter the security key.
8. If you have a secondary RADIUS server, enter its IP address, port, and secret key.
9. Click Apply Settings to save your settings.
eHome EH100 User Manual

Configure WPA (RADIUS)