Static (Assigned By Isp) - eHome EH100 User Manual

Section  - Configuration
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP
form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your
ISP.
Subnet Mask: Enter the Subnet Mask assigned by
your ISP.
ISP Gateway:
Enter the Gateway assigned by your
ISP.
MAC Address:
The default MAC Address is set to the
WAN's physical interface MAC address
on the Broadband Router. It is not
recommended that you change the
default MAC address unless required
by your ISP.
Clone MAC You can use the Clone MAC Address
Address:
button to copy the MAC address of your
network adapter and replace the WAN
MAC address with it. Some ISP's record
the MAC address of the network adapter
in the computer used to initially connect
to their service. The ISP will then only
grant Internet access to requests from
a computer with this particular Mac Address.
Primary DNS
Address: Enter the Primary DNS server IP address assigned by your ISP.
eHome EH100 User Manual
Internet Connection Setup

Static (assigned by ISP)