L2Tp - eHome EH100 User Manual

Section  - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Select Dynamic (most common) or

L2TP:

Static. Select Static if your ISP assigned
you the IP address, subnet mask,
gateway, and DNS server addresses.
IP Address:
Enter the IP address (Static L2TP
only).
Subnet Mask:
Enter the Primary and Secondary DNS
Server Addresses (Static L2TP only).
Gateway:
Enter the Gateway IP Address provided
by your ISP.
DNS:
The DNS server information will be
supplied by your ISP (Internet Service
Provider.)
Enter the Server IP provided by your ISP
Server IP:
(optional).
Enter your L2TP account name.
L2TP Account:
Enter your L2TP password and then
L2TP Password:
retype the password in the next box.
Maximum Idle
Enter a maximum idle time during which
Time:
the Internet connection is maintained
during inactivity. To disable this feature,
enable Auto-reconnect.
eHome EH100 User Manual
Internet Connection Setup
L2TP