eHome EH100 User Manual page 40

Section  - Configuration
To create a Port Forwarding rule, check the box to enable the rule, and fill in the required configuration fields.
Name:
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on
your local network that you want to allow
the incoming service to.
Application
Select the Application Name drop
Name:
down menu for a list of pre-defined
applications. If you select one of the
pre-defined applications, you must then
click the arrow next to the Application
Name menu to automatically fill in the
Port and Traffic Type fields.
Select your computer by name from a list
Computer
of DHCP clients in the Computer Name
Name:
drop down menu. This is an alternative to
manually entering the IP address.
Port:
Enter the Start port and End port that you want to forward. When only forwarding one port, enter the port number in both
fields.
Select TCP, UDP, or Both.
Traffic Type:
eHome EH100 User Manual 0