Pptp - eHome EH100 User Manual

Section  - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is used for some DSL services.

PPTP:

Select Dynamic (most common) or
Static. Select Static if your ISP assigned
you the IP address, subnet mask,
gateway, and DNS server addresses.
IP Address:
Enter the IP address (Static PPTP
only).
Subnet Mask: Enter the Primary and Secondary DNS
Server Addresses (Static PPTP only).
Gateway:
Enter the Gateway IP Address provided
by your ISP.
Server IP:
Enter the Server IP provided by your ISP
(optional).
PPTP Account:
Enter your PPTP account name.
Maximum Idle
Enter a maximum idle time during which
Time:
the Internet connection is maintained
during inactivity. To disable this feature,
enable Auto-reconnect.
Maximum Transmission Unit - you may
MTU:
need to change the MTU for optimal
performance with your specific ISP. 1492
is the default MTU.
Connect Mode:
Select either Always-on, Manual, or
Connect-on demand.
eHome EH100 User Manual
Internet Connection Setup
PPTP