Making Changes - wattstopper EW-200-120 Installation Instructions Manual

Making Changes

If you want the lights to turn on/high sooner—turn the light level dial toward the sun
desired; this raises the light level setting. (Remember, the sensor must detect motion for lights
to turn on.)
• The lights turn on sooner in the evening.
• The lights stay on longer in the morning.
If you want the lights to turn on later—turn the light level dial toward the moon
desired; this lowers the light level setting. (Remember, the sensor must detect motion for lights
to turn on.)
• The lights turn on later in the evening.
• The lights turn off sooner in the morning.
Notes:
• When testing adjustments, make sure not to block any of the light that is reaching the
sensor or reflect any light into the sensor's lens.
• The sensor requires about 5 seconds for light level adjustments to take effect. This feature
prevents the lights from turning on/high and off/low with quick light reflections, from car
windows for example.
• The sensor will not turn lights off/low until no motion is detected and the time delay
elapses.
Call 1(800) 879-8585 or 1(972)578-1699 For Technical Support
icon, as
icon, as
8