Table of Contents
Advertisement
Under-counter installation
Two people are required to install the
appliance.
^ The appliance must be installed in a
stable and correctly aligned niche on
a level surface.
^ The niche must be horizontally and
vertically aligned.
^ The required ventilation
cross-sections must be ensured (see
"Installation - Ventilation" and
"Installation dimensions").
To install the appliance you will need
the following tools:
– A selection of screwdrivers
– Level
– Tape measure
The following installation parts are
required:
– Ventilation grill
– Air filter
– Foam block for air filtration in the
appliance plinth
– Screws to secure the appliance in
the niche
– Wrench to adjust height in the niche
66
Preparing the appliance
The air filter prevents soiling of the
compressor compartment to ensure
efficient functioning of the
appliance.
^ Carefully remove the protective foil
from air filter a.
^ Insert the air filter into the bottom left
of the appliance plinth.
^ Connect the appliance to the
electrical supply (see "Electrical
connection").
Advertisement
Table of Contents
