Moving The Wooden Shelves - Miele KWT 6312 Operating And Installation Instructions

Moving the wooden shelves

The wooden shelves can be removed
and replaced again if required.
^ Pull the wooden shelf out until it stops
a.
^ Release the wooden shelf at the
back, lifting the shelf on the left and
right at the same time b.
^ Lift the wooden shelf forwards to
remove it.
If you need more space for your bottles:
^ cover the top runners on both sides
which are now not needed with the
covers supplied. The thicker side of
the cover should point forwards. The
covers are held in position with
magnets.
^ To replace the shelf, click it into
place on the extended runners c.
Storing wine bottles
The notches on the wooden shelf fit
into the retaining brackets. The
magnetic strip should be pointing
forwards.
^ Slide the wooden shelf back into the
appliance as far as it will go d.
^ Push the wooden shelf back so that it
clicks into place at the front.
^ Press down on the back of the
wooden shelf so that it clicks into
place at the back e.
31