Caller List - Panasonic KX-TGH222AZ Operating Instructions Manual

R Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your service
provider/telephone company.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed after you hear
the call waiting tone on the handset.
1
Press MR/ECON to answer the 2nd call.
2
To switch between calls, press MR/ECON.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.

Caller list

Important:
R Make sure the unit's date and time setting
is correct (page 13).
Viewing the caller list and calling
back
1
M N
TGH222_23AZ(en)_0314_ver101.pdf 37
Caller ID Service
2
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
3
To call back, press M
To exit, press M N.
Note:
R In step 2, to see the detailed information
when in multiple display mode:
MMENUN a MbN: "Detail" a MOKN
R If the entry has already been viewed or
answered, " " is displayed.
R If you do not want to dial the area code
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 33).
Using the Smart Function Key
When is displayed and the
flashes slowly, there are missed calls.
Press M N in step 1 on "Viewing the caller
list and calling back", page 37.
R "Missed Call" must be set to "On" in
"Setting the Smart Function Key", page 13.
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
view the caller list after pressing M
R When the unit has new messages and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
Editing a caller's phone number
The caller's telephone number, which is sent
to your telephone from your local telephone
exchange, includes "0" and an area code
prefix. For local calls, "0" and the area code
prefix can be omitted. (for New Zealand)
1
M N
2
MbN: Select the desired entry. a MMENUN
3
MbN: "Edit & Call" a MOKN
4
Edit the number.
5
M N
N.
indicator
N.
37
3/14/2014 10:01:16 AM