How To Set A New Default; How To Reset To The Factory Settings - Brother MFC-J650DW Advanced User's Manual

Chapter 8

How to set a new default

You can save the Scan to Media settings
(Scan Type, Resolution, File Type,
Scan Size, Auto Crop
Remove Background Color) you use
most often by setting them as the default
settings. These settings will stay until you
change them again.
1
MFC-J870DW and MFC-J875DW only
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Scan to Media.
d
Press Options.
e
Press a or b to display Scan Type,
Resolution, File Type,
Scan Size, Auto Crop
Remove Background Color, and
then press the setting you want to
change. Then press the option you want
to set.
1
MFC-J870DW and MFC-J875DW only
Repeat this step for each setting you
want to change.
f
After you are finished choosing your
preferred settings, press a or b to
display Set New Default.
g
Press Set New Default.
h
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
i
Press .
70
8
1
and
1
or
How to reset to the factory
settings
You can restore all the Scan to Media settings
(Scan Type, Resolution, File Type,
Scan Size, Auto Crop
Remove Background Color), that you
have changed, to the factory settings.
1
MFC-J870DW and MFC-J875DW only
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Scan to Media.
d
Press Options.
e
Press a or b to display
Factory Reset.
f
Press Factory Reset.
g
The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
h
Press .
8
1
and