Cadac J-Type Installation & User Manual page 91

7925 Programmable Group Module
Revision J2005-2
:<58#3URJUDPPDEOH#*URXS#0RGXOH
4.1.23 Sub to Matrix Restore
4.1.25 Sub to Matrix Isolate
714153 6XE#WR#0DWUL[#5RXWLQJ
These buttons may be controlled by the Cue Automation.The associated LED indi-
cates On/Off for each Sub to Matrix cross point. They are also used in conjunction
with SELECT, LOCK and RESTORE to select/control audio level at each cross point.
714154 6XE#WR#0DWUL[#'LVSOD\
The display indicates which Sub to Matrix cross point that is being adjusted.
714155 6XE#WR#0DWUL[#/HYHO#&RQWUROOHU
This rotary control is used to adjust the Sub to Matrix Level, indicated by a ring of
4.1.20 Sub to Matrix Routing
4.1.21 Sub to Matrix display
4.1.22 Sub to Matrix Level Controller
4.1.24 Sub to Matrix Select
4.1.26 Sub to Matrix Selection Lock
4-5
J-Type