Panasonic BL-C10 Installation & Troubleshooting Manual page 21

Troubleshooting
Problem
The Top page is
displayed on the
LAN, but not
displayed from
the Internet.
Authentication
windows are
consequently
displayed.
Only half of the
image is
displayed.
• The default gateway address may be wrong.
Assign the correct default gateway address (see page 29 of
the Operating Instructions in the Setup CD-ROM).
• UPnP is disabled on the router.
TM
Enable UPnP
• Port forwarding is not enabled on the router (see page 12).
Enable port forwarding seeing the router manual for details.
• Firewalls such as packet filtering on the router is blocking
camera access.
Set the router to allow access to the camera seeing the
router manual for details.
• You are accessing the camera with an IP address for local
camera access.
Access the camera with the global IP address of the router
and port number of the camera.
• The router does not allow access to the camera under the router
with the global IP address.
If you access the camera on the LAN, access with the
address for local camera access.
• User name and password for the administrator or general users
are changed.
Close the web browser, and access the camera again.
• You are using Internet Explorer 4.xx or lower.
Upgrade Internet Explorer to version 6.0 or greater.
Cause and Remedy
on the router following the router manual.
TM
Installation/Troubleshooting
21