Dynamic Range Control - Dab - Roberts Play 10 User Manual

Dynamic Range Control (DRC) settings - DAB
The DRC facillity can make quieter sounds easier to hear when your radio
is used in a noisy environment.
1. Press and release the On/Off button to switch on your radio.
2. If you are listening in FM mode, press and hold the Mode button.
'DAB' will show on the display.
3. Press and release the Menu button. The DAB menu will show on
the display.
4. Rotate the Tuning/Select control until 'DRC' shows on the display.
5. Press and release the Tuning/Select control to enter adjustment
mode.
6. Rotate the Tuning/Select control to select required DRC setting
(default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
7. Press and release the Tuning/Select control to confi rm the setting. The
display will return to the station name display after several seconds.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
11
1
2,3
4-7