Mono/Stereo And Dx/Local Switch - Roberts R876 User Manual

Multi-band digital preset stereo world radio

Hide thumbs Also See for R876:

Table of Contents

Mono/Stereo and DX/Local switch

1. To listen to FM stereo broadcasts, tune to the required

station, plug in headphones and set the "Mono/Stereo

switch located on the left side of the radio to the

"Stereo" position. If the station being received is weak

some hiss may be audible, to reduce the hiss set the

"Mono/Stereo" switch to the "Mono" position to re-

turn to mono operation.

Note: FM stereo is only available via headphones.

2. When listening to AM (MW/LW/SW) broadcasts, the

"DX/Local" switch adjusts the radios sensitivity. If you

are listening to a strong station and the signal is dis-

torted, set the "DX/Local" switch to the "Local" posi-

tion for best reception. For normal or weak stations set

the "DX/Local" switch to the "DX" position for maxi-

mum sensitivity.

If you need any further advice, please call our Technical Helpline on :-

0181 758 0338 (Mon-Fri)

Table of Contents