Advertisement
(D
ABOUTYOURRAN(iE the cookto)
• Canadianmodels only: The right front surface element
HOT SURFACE lightwill turn on whensmooth
may not operate during a self-clean operation. This is
is hot.Light will turn offwhen top cools. Hot su
normal,
is locatedeither on the backguard or at the bac
• Cooktopmay emit a light smoke and odor the first few
the cooktop.
times cooktop is used.This is normal.
• Element under smoothtop cycles on and off to maintain
HOTSURFACE _-
....
the preset heatsetting. Elementwillglow red when it
BACKGUARoLIGHTON
,_0
" '_J"'_)"
cycles ON.
_
8_
• SmoothtopRETAINSheat for a period of time after the
......
unit is turned off. When the HOTSURFACE light turns
off, cooktop will be cool enoughto touch.
• Beforeusing cooktop for the first time, Cleanit
HOTSURFACE
__.:_.
thoroughly as directed in the cleaning chart on page 22.
LIGHT ON CO0_
This will protectthe smoothtopand will guaranteea
cleancooktopwhenthe elementsare turned-on.
Aluminum foil will damagethe smoothtopif it melts onto
_
_._
the top. Neverusealuminum foilor foil-typedisposable
containers suchas popcornpoppers. T hey may leave
metalmarksor may permanently meltontothe
smoothtop.
Important:Watchsugaryor starchysolutionscarefullyto
avoidboilovers. I fa sugarsolution(jam,jelly,candy)or a
starchsolution (potatoes, r ice) boilsover,itmay pitor
discolor the smoothtop. T urnelementto LOW andclean
immediately,See page22 forcleaninginstructions.
Advertisement
