Section 2: Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Coniguration. Zero Coniguration automatically
conigures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Coniguration will automatically conigure your DCS-7010L
and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access
your camera from the www.mydlink.com website to manage and monitor your DCS-7010L.
Connect the Ethernet Cable
Connect the provided Ethernet cable to the cable harness Ethernet coupler .
Connect the other end of the provided Ethernet cable to your network.
Attach the External Power Supply
Attach the external power supply to the cable harness power coupler.
Connect the adapter to a wall outlet or power strip.
1
Power Cable
2
Ethernet Cable
D-Link DCS-7010L User Manual
Installation
Zero Coniguration Setup
Pre attached power cable
Pre attached Ethernet cable
1
2
12