Enterprise 4500 System Power Cord; Figure 2-3 Key Switch Positions; Figure 2-4 Ac Power Switch And Power Receptacle - Sun Microsystems 6500 Installation Manual

2.3.2

Enterprise 4500 System Power Cord

1. Insert the key provided with your system into the front panel key switch. Turn it
to the Standby position (fully counterclockwise,
FIGURE 2-3
2. Turn the AC power switch (
AC connector
AC power switch
FIGURE 2-4
3. Connect the power cord to the AC connector.
4. Connect the power cord to a grounded wall outlet.
The outlet must be a 100-240 VAC 15A circuit.
2-4 Sun Enterprise 6500/5500/4500 Systems Installation Guide • August 2001
Front view
Key Switch Positions
FIGURE 2-4
AC Power Switch and Power Receptacle
FIGURE 2-3
Standby
) to Off.
Rear view
).