English - Kenwood CH180A Manual

Your Kenwood Mini Chopper is
suitable for chopping a range of
foods including nuts, breadcrumbs,
meat (raw and cooked), onions,
garlic and fruit purée.
before using your Kenwood
appliance
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
The blades are sharp, handle with
care. Hold the knife blade at
the top away from the cutting
edge, both when handling and
cleaning.
●
Switch off and unplug:
● ● before fitting or removing parts
● ● after use
● ● before cleaning.
●
Keep hands and utensils out of the
bowl whilst connected to the power
supply.
●
Remove the knife blade before
emptying the bowl.
●
Never use a damaged appliance.
Get it checked or repaired: see
'service'.
●
Never let the power unit, cord or
plug get wet.
●
Don't let excess cord hang over the
edge of a table or worktop or touch
hot surfaces.
●
Never leave the appliance on
unattended.
●
This appliance is not suitable for
processing very hard foods e.g ice-
cubes, coffee beans, hard spices,
grinding granulated sugar to caster
sugar, or processing hot liquids.
●
Misuse of your food chopper can
result in injury.

English

●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of the power unit.
●
This appliance complies with
European Economic Community
Directive 89/336/EEC
before using for the first time
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
key
lid
knife blade
bowl
drive shaft
control button
power unit
to use your mini
chopper
1 Fit the bowl onto the power unit –
turn in a clockwise direction until it
locks
2 Fit the blade
3 Place the lid onto the bowl and turn
clockwise until it locks
Your mini chopper will not
operate unless the bowl and
lid are correctly engaged.
2
.
.
.