My Surveillance - Live View - D-Link DNS-327L User Manual

Section 4 - Configuration
COMPONENT
Live Video
Stop/Start
Manual Recording & General
Settings Tab
Digital Zoom
Camera Details
Patrol Mode
Pan-Tilt-Zoom Control
Zoom
Mute and Volume Slider
E-map
Snapshot
Auto Scan
View as 1x1
View as 2x2
Actual Size
Full Screen
Camera Name and IP Address
DNS-327L
D-Link ShareCenter

My Surveillance - Live View

DESCRIPTION
View the live video of cameras connected to he DNS-327L via the network
To Stop or Start Camera Live View
Click the "Manual Recoding" to Stop or Start camera Manual Recording
Click the "gear cog" to setup basic configuration
Enable this on individual cameras
This screen indicates, the currently selected camera's IP address, name, status and bit rate
Displays the current Patrol Radius, sets Preset Point, and directs you to the Preset Point.
Used for cameras that support Pan-Tilt-Zoom controls. You can use these controls to control the direction of the camera.
Click the + or - button to zoom in or zoom out. This option is only available when enabling Digital Zoom
The mute button can be used to mute the sound from the camera and the slider bar used to adjust the volume.
Use the E-map button to toggle between the live camera view and the E-map display
Take a live snapshot of the live streaming video
Activate auto scan to rotate the channels on the screen display
View one screen at a time
View four cameras at a time
The bottom lets you view cameras with the actual size
View a live video stream of any camera in full scream mode, press Escape to return to the user interface.
These icons show the status of each camera and allows you to double-click to toggle the status of
each camera.
User Manual
344