Fax Dialing Using A Macro Key; Copying Using Macro Key; Printing Lists Using The Macro Key; Storing Fax Documents Using Macro Key - Muratec F-300 User Manual

Fax dialing using a Macro key

To dial a fax number using a Macro key:
1
Set the document.
2
Press the Macro key in which you have stored the fax communication command.
3
Press [Start], if you have not registered "Start" in the Macro key.
Your machine will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the LCD shows:
** Reserved
Nov 27 2004
If you programmed this key to perform the operation immediately after you press it, the
LCD shows the number:
9-1-972-55-4335

Copying using Macro key

To copy using a Macro key:
1
Set the document.
2
Press the Macro key in which you have stored the copy command.
3
Press [Start], if you have not registered "Start" in the Macro key.

Printing lists using the Macro key

To print a list using a Macro key:
1
Press the Macro key that is programmed for list printing.
2
Press [Enter], if you have not registered "Enter" in the Macro key.

Storing fax documents using Macro key

To store a fax document for either polling or F-Code polling using a Macro key:
1
Set the document.
2
Press the Macro key that is programmed for the storing operation.
3
Press [Enter], if you have not registered "Enter" in the Macro key.
**
2:15pm
Ltr Mem 99%
S
PECIAL FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
8-7