Dubbing (Tapa Y Dvd) - Sony RDR-VX511 Service Manual

QQ
3 7 63 1515 0
Notes
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder's power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• During Synchro-Rec standby, the Auto Clock Set
function does not work.
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• You cannot record on a tape with its safety tab
removed.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
TE
L 13942296513
Recording From Connected
Equipment Without a Timer
You can record from a connected VCR or similar
device. For connection details, see "Connecting
Another VCR or Similar Device" on page 26.
z REC
REC MODE
1
Press VIDEO to operate the VCR.
2
Insert a tape with its safety tab in place.
3
Press INPUT SELECT repeatedly to select
an input source according to the
connection you made.
The front panel display changes as follows:
LINE1
Channel
www
4
Press REC MODE repeatedly to select the
recording mode, "SP" or "EP."
5
Insert the source tape into the connected
equipment and set to playback pause.
.
6
Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
http://www.xiaoyu163.com
Changing or Canceling VCR
Timer Settings (Timer List)
You can change or cancel timer settings using the
Timer List menu.
SYSTEM
MENU
O RETURN
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "Timer," and press ENTER.
3
Select "Timer List," and press ENTER.
Timer List
No RecTo Date Start Stop CH
01 VCR 04/15 09:00PM 10:00PM CH8
02 VCR 04/30 09:15PM 09:45PM CH11
03 --- --/-- --:-- --:-- ----
04 --- --/-- --:-- --:-- ----
05 --- --/-- --:-- --:-- ----
06 --- --/-- --:-- --:-- ----
Timer information displays the recording
date, time, recording mode, etc.
If there are more than six timer settings, press
m to display the next page.
To stop recording, press x STOP on this
recorder.
Notes
• A video game image may not be recorded clearly.
• You cannot record on a tape with its safety tab
removed.
• During recording or recording pause, you cannot
change the recording mode.
• You cannot change the channel or input source during
recording.
VIDEO
INPUT
SELECT
x STOP
LINE2
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
4
Select the timer setting you want to change
or cancel, and press ENTER.
The sub-menu appears.
Timer List
No RecTo Date Start
01 VCR 04/15 09:00PM
02 VCR 04/30 09:15PM
03 --- --/-- --:--
04 --- --/-- --:--
05 --- --/-- --:--
06 --- --/-- --:--
5
Select one of the options, and press
ENTER.
"Edit": Changes the timer setting.
Select an item using </, and adjust using
M/m. Press ENTER.
Timer – Standard
M/m/</,,
ENTER
No Rec To Date Start
No.1
01 DVD 04/15 09:00PM
02 RecTo Date DVD 04/30 Start 09:15PM
03 --- --/-- --:--
VCR 04/15 09 : 00
04 --- --/-- --:--
05 --- --/-- --:--
06 --- --/-- --:--
"Del": Erases the timer setting.
Select "OK" and press ENTER when asked
for confirmation.
10:10 AM
Timer List
Mode Edit
No Rec To Date Start
SP
01 VHS 4/15 09:00PM
SP
02 VHS 4/30 09:15PM
Do you want to erase "No.01"?
---
03 --- --/-- --:--
---
04 --- --/-- --:--
OK
---
05 --- --/-- --:--
---
06 --- --/-- --:--
6
Press SYSTEM MENU to turn off the Timer
List.
To return to the previous display
Press O RETURN.
Notes
Q Q • Even when correctly set, the program may not be
3 6 7 1 3
recorded if another recording is underway, or other
prioritized timer setting overlaps. For priority, see
page 77.
,continued 79 80
Dubbing (TAPE
Dubbing From a VHS Tape to
a DVD
+ RW -RW -RW
VR
Video
You can easily record (dub) a VHS tape to a disc.
Before dubbing, make the necessary audio settings
on the VCR.
How titles and chapters are created
The recorder takes each recording on the VHS tape
and automatically divides them into titles as they
are dubbed to a disc. These titles are then further
divided into chapters at either 5 or 15-minute
intervals, according to the "DVD Auto Chapter"
setting of "Features" in the "Setup" display.
DVD
AUDIO
SYSTEM
MENU
X PAUSE
REC MODE
T
VIDEO
.
1
Press DVD and insert a recordable disc.
To select the recording mode, press REC
MODE repeatedly (see page 45).
81 82
1-19
9 4 2 8
• You cannot change the timer settings for a recording
currently underway.
• The Timer List displays both the DVD recorder and
VCR timer settings.
10:10 AM
Stop CH Mode Edit
10:00PM CH8 Edit
09:45PM CH11 Del
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
10:10 AM
End Source Mode Edit
10:00PM CH8
Stop 09:45PM CH CH11 Mode
--:-- ---- ---
10 : 00 CH 8 SP
PM PM
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
10:10 AM
End Source Mode Edit
10:00PM CH8
09:45PM CH11
--:-- ---- ---
--:-- ---- ---
Cancel
--:-- ---- ---
--:-- ---- ---
1 5 0 5 8 2 9 9 4
2
Insert a source VHS tape.
3
Press VIDEO to operate the VCR.
DVD)
y
4
Start playing the VHS tape, and then press
x STOP or X PAUSE at the point where
you want to start dubbing.
To select VCR sound, press AUDIO during
playback (see page 72).
+ R - R
5
Press T VIDEO on the recorder.
Dubbing starts.
To stop dubbing
Press x STOP.
Note that it may take a few seconds for the
recorder to stop dubbing.
To play discs recorded with this recorder on
other DVD equipment
Finalize the disc (see page 86).
To dub using the on-screen menu
VIDEO
1
After step 4 above, press SYSTEM MENU.
2
Select "Dubbing" from the System Menu, and
press ENTER.
Dubbing
Title List
Simple Dubbing
Program Dubbing
Timer
M/m/</,,
DV/D8 Dubbing
Edit
ENTER
Dubbing
Disc Setting
H PLAY
Setup
x STOP
3
Select "Simple Dubbing," and press ENTER.
Dubbing
Title List
Simple Dubbing
Program Dubbing
Timer
m
DV/D8 Dubbing
Edit
Dubbing
Disc Setting
co
Setup
4
Select "VIDEO t DVD," and press ENTER.
The display asks for confirmation.
5
Select "Yes," and press ENTER.
Dubbing starts.
9 9
2 8 9 9
10:10 AM
10:10 AM
VIDEO --> DVD
DVD --> VIDEO