Sony RDR-VX511 Service Manual page 34

QQ
3 7 63 1515 0
Note
Sound will be interrupted during Scan Audio.
DV Audio Input
Stereo 1
Records original sound only.
Normally select this when
dubbing a DV format tape.
Stereo 2 Records additional audio
only.
Mix Records both original and
additional sounds.
Note
Select "Stereo 2" or "Mix" if you have added a second
audio channel when recording with your digital video
camera.
Line Audio Input
When recording from equipment connected to the
LINE 1 IN or LINE 2 IN jack to a DVD disc in this
recorder, select line input audio.
Stereo
Records stereo sound only.
Select this for discs other
than DVD-RWs (VR mode).
Main/Sub Records the two different
soundtracks on DVD-RWs
(VR mode). You can select
either soundtrack when
playing back the disc.
z Hint
Audio selected with the connected equipment is recorded
on a disc other than DVD-RWs(VR mode).
TE
L 13942296513
Parental (DVD VIDEOs only)
Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced
with different scenes.
1
After step 3 above, select "Parental," and
press ENTER.
• If you have not entered a password, the
display for registering a new password
appears.
Enter a 4-digit password using the number
buttons.
Create the password. 10:10 AM
Title List
Timer
Create the password.
Edit
Dubbing
Disc Setting
Setup
The display for confirming the password
appears.
Re-enter the password.
Create the password. 10:10 AM
Title List
Timer
Confirm the password.
Edit
Dubbing
Disc Setting
Setup
• When you have already registered a
password, the display for entering the
password appears.
Enter a 4-digit password using the number
buttons.
Enter the password. 10:10 AM
Title List
www
Timer
Enter the password.
Edit
Dubbing
Disc Setting
Setup
.
http://www.xiaoyu163.com
Recording and VCR Settings
(Features)
The "Features" setup allows you to change the
tape length, auto play and auto repeat settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Features," and press ENTER.
The "Features" setup appears with the
following options. The default settings are
underlined.
Features 10:10 AM
Title List
DVD Auto Chapter : 5 Min
Format DVD : VR
Timer
VCR Function
Edit
Synchro Recording : to DVD
Dubbing
Disc Setting
Setup
DVD Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at
specified intervals. The markings are inserted
while the recording is being made.
Off No chapter mark is inserted.
5 Min Inserts chapter marks at
approximately 5 minute
intervals.
15 Min
Inserts chapter marks at
approximately 15 minute
intervals.
Note
Actual intervals may differ depending on the size of the
recording. The selected setting should be regarded as an
approximate chapter interval.
99
,continued
2
Select "Rating Level," and press ENTER.
The selection items for "Rating Level" are
displayed.
Parental
10:10 AM
Title List
Rating Level : On: Level 8 (Adults) Off
Change Password Level 8 (Adults)
Timer
Level 7
Edit
Level 6
Dubbing Level 5
Level 4
Disc Setting
Level 3
Setup
Level 2
The lower the value, the stricter the limitation.
3
Select the level, and press ENTER.
The Parental setting is complete.
• To cancel the Parental setting for the disc,
set "Rating Level" to "Off" in step 3.
• To change the password, select "Change
Password" in step 2, and press ENTER.
When the display for registering a password
appears, enter a new four-digit password
using the number buttons.
Notes
• If you forget your password, select "Factory Setting" of
"Options" in the "Setup" display.
• Playback of discs without the Parental Control function
cannot be limited on this recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
Front Display
Adjusts the lighting of the front panel display.
Auto Adjusts to low lighting when
power is off.
Bright Maintains bright lighting
when power is off.
Dimmer
Maintains low lighting
regardless of whether power
is on or off.
x ao u163
y
i
,continued 101
http://www.xiaoyu163.com
2 9
8
Format DVD (DVD-RWs only)
Selects the format for an unused DVD-RW, when
first inserted.
VR Automatically formats the disc in
VR mode.
Video Automatically formats the disc in
Video mode.
VCR Function
Press ENTER and select "Tape Length," "Auto
Play," or "Auto Repeat."
Tape Length
T120 For T-120 or shorter length tapes.
T160 For T-160 length tapes.
T180
For T-180 or longer length tapes.
Auto Play
On Starts playback automatically,
when you insert a tape with its
safety tab removed.
Off
Turns off Auto Play. You need to
press H PLAY to start
playback, even if you insert a tape
with its safety tab removed.
Auto Repeat
On Plays back a tape repeatedly. The
VCR rewinds the tape to the
beginning and restarts playback
automatically.
Off Turns off Auto Repeat.
Synchro Recording
to DVD
Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
to a DVD disc.
to Video Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
to a VHS tape.
Q Q
3 6 7 1 3
100
Command Mode
Changes the command mode of this recorder if
other DVD equipment is assigned the same
command mode. Be sure to match the
COMMAND MODE switch on the remote to the
setting made here. For details, see "If you have a
Sony DVD player or more than one Sony DVD
recorder" on page 24.
DVD 1 Select this if the default
command mode conflicts
with other DVD equipment.
DVD 2 Select this if the default
command mode conflicts
with other DVD equipment.
DVD 3 The default command mode
of the recorder.
Factory Setting
Allows you to return the setup settings to their
default settings. Note that all of your previous
settings will be lost.
1
After step 3 above, select "Factory Setting,"
and press ENTER.
2
Select "Start," and press ENTER.
The setup settings return to their default
settings.
3
Press ENTER when "Finish" appears.
The power automatically turns off and then on
again, and the recorder is reset to the factory
settings.
When the "Easy Setup" display appears,
follow the instructions for Easy Setup
(page 22) from step 4.
.
102
1-24
9 4 2 8
Language, Parental Control
Settings/Factory Settings
(Options)
The "Options" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Options," and press ENTER.
The "Options" setup appears with the
following options. The default settings are
underlined.
Options
10:10 AM
Title List
Language
Parental
Timer
Front Display : Auto
Edit
Command Mode : DVD 3
Dubbing
Factory Setting
Disc Setting
Setup
Language
OSD (On-Screen Display)
Switches the display language on the screen.
Disc Menu (DVD VIDEOs only)
Switches the language for the DVD menu.
Audio (DVD VIDEOs only)
Switches the language of the soundtrack.
When you select "Original," the language given
priority in the disc is selected.
Subtitle (DVD VIDEOs only)
Switches the language of the subtitles recorded on
the disc.
When you select "Auto," the subtitle language
changes according to the language you selected
for the soundtrack. See page 118 for an
explanation of the language abbreviations.
Note
If you select a language in "Disc Menu," "Subtitle," or
"Audio" that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
1 5 0 5 8 2 9 9 4
Easy Setup
(Resetting the Recorder)
Select this to run the Easy Setup program.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Easy Setup," and press ENTER.
Easy Setup 10:10 AM
Follow the guide to make initial settings.
Before you start,
check that you have made all necessary connections.
Start Cancel
4
Select "Start," and press ENTER.
5
Follow the instructions for Easy Setup
(page 22) from step 5.
m
co
9 9
2 8 9 9