Technical Description; Installing The Seat Heater - Waeco MagicComfort MSH50 Installation And Operating Instructions Manual

_MSH50_MSH501.book Seite 22 Donnerstag, 13. August 2009 2:48 14

Technical description

5 Technical description
The heating elements for the seat heater MagicComfort MSH50 and
MagicComfort MSH501 can be installed in the driver's seat and in the passenger
seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6

Installing the seat heater

6.1 Tools required (fig. 1, page 3)
For installation and assembly you will need the following tools:
Drill bit set (1)
Drill (2)
Screwdriver (3)
Set of ring or open-ended spanners (4)
Measuring ruler (5)
Hammer (6)
Centre punch (7)
To make and test the electrical connection, the following tools are required:
Diode test lamp (8) or voltmeter (9)
Crimping tool (10)
Insulating tape (11)
Hot air blower (13)
Soldering iron (14)
Solder (15)
Cable bushing sleeves (if necessary)
To fasten the cables you may require additional cable binders.
22
MagicComfort MSH50, MSH501