Multitech MultiModem MT2834MR6 User Manual page 103

&RFn n = 0 or 1
&RN n/a
&RP n/a
&RR n/a
$Rn n = 0 or 1
Sr=n r = 0–11, 13,
24, 25, 30,
32, 34, 36,
37, 43, 48, or
94; n varies
Sr? r = 0–11, 13,
24, 25, 30,
32, 34, 36,
37, 43, 48,
or 94
&Sn n = 0, 1, or 2
&SFn n = 0 or 1
$SBn n = speed
Baud Adjust
($BA) must
be off.
#Sy y = password
#S=y y = password
T
In dialing
command
CTS/RTS Interaction Control
&RF0 Let CTS follow RTS.
*** &RF1 Let CTS act independently.
Rate Renegotiation
Forces the modem to renegotiate the data rate.
Immediate Line Probe
Initiates a retrain that makes the modem read line probe information if %DP1 is
selected. Valid only when online in V.34 mode.
Retrain
Initiates an immediate retrain without a line probe reading.
Retransmit Count
*** $R0 Disconnect after 12 retransmits.
$R1 Do not disconnect after 12 retransmits.
Set Register Value
Set value of S-register r to value of n , where n is entered in decimal format.
Read Register Value
Read value of S-register r and display value in 3-digit decimal form.
Data Set Ready Control
&S0 Force DSR high (on).
*** &S1 Let DSR follow CD.
DSR drops on disconnect for time set by S24 , then goes high again.
&S2
DSR/CD Interaction Control
*** &SF0 Select DSR to follow CD.
&SF1 Select DSR to be independent.
Serial Port Baud Rate
$SB300 Select 300 bps at serial port.
$SB1200 Select 1200 bps at serial port.
$SB2400 Select 2400 bps at serial port.
$SB4800 Select 4800 bps at serial port.
$SB9600 Select 9600 bps at serial port.
$SB12000 Select 12,000 bps at serial port.
$SB19200 Select 19,200 bps at serial port.
$SB38400 Select 38,400 bps at serial port.
$SB57600 Select 57,600 bps at serial port.
*** $SB115200 Select 115,200 bps at serial port.
Enter Setup Password
Password is case sensitive.
Store Setup Password
Password must be 6–10 characters long, and may consist of any keyboard charac-
ters.
Tone-Dial
Modem tone-dials numbers following the T.
Appendix
103