C7Q67 Safety Instructions Server Safety Information This document applies to Supermicro Server board, Supermicro Server Chassis (pedestal and rack-mount) and installed peripherals. To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warnings and precautions in this guide before installing or maintaining your Supermicro server product. In the event of a conflict between the information in this document and information provided with the product or on the website for a particular product, the product documentation takes precedence.
C7Q67 Safety Instructions Power and Electrical Warnings CAUTION The power button, indicated by the stand-by power marking, DOES NOT completely turn off the system AC power, 5V standby power is active whenever the system is plugged in. To remove power from system, you must unplug the AC power cord from the wall outlet.
C7Q67 Safety Instructions CAUTION If the server has been running, any installed processor(s) and heat sink(s) may be hot. Unless you are adding or remov- ing a hot-plug component, allow the system to cool before opening the covers. To avoid the possibility of coming into contact with hot component(s) during a hot-plug installation, be careful when removing or installing the hot-plug component(s).
Need help?
Do you have a question about the c7p67 and is the answer not in the manual?
Questions and answers