Test Your Wireless Network Connection; Figure 21 - Sbr-Ac1750 Wps Pairing Button - Arris SBR-AC1750 User Manual

Surfboard

Hide thumbs Also See for SBR-AC1750:

Table of Contents

Setting Up a Wireless Network Connection

2. Press and hold the WPS button located on the SBR-AC1750 rear panel for five to 10 seconds

and then release (see

3. If applicable, press the WPS button on your WPS-enabled computer or other WPS device.

4. Repeat step 3 for each additional WPS-enabled wireless device that you want to connect to

your wireless network.

Test Your Wireless Network Connection

Perform the following connectivity test to check that your SBR-AC1750 and other wireless

devices are connected to your wireless home network:

1. If the wireless devices successfully connected to the wireless network, disconnect the

Ethernet cable from your computer and SBR-AC1750.

2. Open a web browser on your computer.

3. Type the default wireless router URL,

Enter

press

If the website did not open, please call

Wireless Router SURFboard® SBR-AC1750 • User Guide

Rear Panel

for the SBR-AC1750 rear view).

Figure 21 – SBR-AC1750 WPS Pairing Button

http://192.168.0.1

ARRIS Technical Support

, in the address bar and then

for assistance.

Table of Contents

Show Quick Links

Table of Contents