Arris SBR-AC3200P User's Quick Start Manual

Before you begin

Internet Service connection required. Two RipCurrent™ devices are needed. RipCurrent utilizes your home's existing
power lines, via G.hn technology, to expand your network coverage. To customize your wireless network connection
and other advanced router settings, see the SBR-AC3200P User Guide for more information. The User Guide is
available online at the ARRIS Support website, www.SURFboard.com/Support/.
Primary LED Status Indicators
GREEN AMBER Flashing RED Flashing
= Normal Operation = WPS Initiated = Start-up / Error Mode
AMBER Solid
= Wi-Fi Disabled
Rear Panel Connections
AC in USB 3.0 USB 2.0
Power 1 USB 2 WAN 1 2 LAN 3
WPS / G.hn WAN LAN
Pairing Button
Place label here
This label provides Device and Wi-Fi network information. Use the QR
code to directly connect mobile devices, or to connect via the ARRIS
SURFboard Mobile App. If you have changed the network settings the
QR code will not apply.
Download the free ARRIS SURFboard
Manager for easy connection and remote
management of your RipCurrent devices.
2
Plug in
RipCurrent over existing power lines
SBR-AC3200P Ripcurrent Router
AC power
cord
Power Power USB 1 USB WAN 2 WAN 1 1 2 LAN 2 LAN 3
1
Easiest if started in the same room
Standby Mode
Standby mode
button
This button on the top is used to place the router in 'Standby' mode.
Pressing the button for 5 seconds disables the Wi-Fi portion of the
router for additional security and power savings when not in use.
The front Primary LED will show Amber when Standby is activated.
Press the button again for 5 seconds to re-activate the Wi-Fi.
SBR-AC1900P LED Status Table
Rear Panel LED Status Indicators
G.hn signal G.hn secure 2.4 GHz
strenth link Wi-Fi
GREEN = GREEN = Secured
Excellent signal
AMBER =
Fair signal
4
Reset
RED = RED = Unsecured
Poor signal
OFF = No signal
Factory Reset NOTE: Please see reverse side for more detailed instructions.
1

Getting Started

Internet
1a
Unplug the power to turn off the modem that is providing your Internet connection. Return Power to your Internet Modem, and let it re-register with your Service Provider.
1b
Connect the power cord to the SBR-AC3200P, once the front panel Primary LED status indicator shows green.
1c Connect the included Ethernet cable between the Blue WAN port on the router and an Ethernet port on your Internet Modem. Verify router connectivity by connecting to
the router and accessing the internet with a PC or other device.
1d
Wait until all 3 Wi-Fi LEDs on the rear panel of the Wi-Fi Router turn solid green.
SBX-1000P
or
SBX-AC1200P
Wi-Fi Hotspot
1 2
3 4 4
Reset Reset
Plug into
AC Wall
Outlet
2a
4
Wi-Fi Connect
SBR-AC3200P
Ripcurrent Router
Power Power USB 1 USB 2 WAN WAN 1 1 2 LAN 2 LAN 3
Please see the reverse
side of this Quick Start
Guide for more detailed
instructions.
Your router will automatically connect to the most appropriate Wi-Fi signal for the client. You can adjust connected radios using the Web Manager, please refer to the User Guide for assistance.
G.hn
Primary LED Signal
Normal Operation
Excellent
Flashing = WPS Initiated
Good
Solid = Wi-Fi Disabled
Start-up / Error Mode Fair
1 2
5.0 GHz 5.0 GHz
Wi-Fi 1 Wi-Fi 2
GREEN = Wi-Fi On
"Flashing" = Wi-Fi Activity
Unlit = Wi-Fi Off
AC Wall
1a
Outlet
AC power
cord
Modem
3
RipCurrent Pairing
SBR-AC3200P Ripcurrent Router
AC power
cord
Power
Power
3a
3s
The digital home with
Connect by using
the Router's default
Online
Wi-Fi credentials
Gaming
1 2
3 4 4
Reset Reset
Smart TV
1
For additional RipCurrent set up information please refer to the Documentation included in the Extender Package.
G.hn 2.5 Ghz 5.0 Ghz 5.0 Ghz
Network Wi-Fi Wi-Fi 1 Wi-Fi 2
1 2
Secured Wi-Fi ON
Flashing = Wi-Fi Activity
Unlit = Wi-Fi OFF
Unsecured
SURFboard SBR-AC1900P
RipCurrent Router
Primary LED
1b
1 2
Power Power USB 1 USB 2 WAN WAN 1 1 2 LAN 2 3 LAN 3 4 4
Reset Reset
1d
Rear
Ethernet WAN
Rear Panel LED
View
2.4 / 5.0 GHz
1c
Green
RipCurrent over existing power lines
1 2
USB WAN 1 2 LAN 3 4
1 USB 2 WAN 1 2 LAN 3 4
Reset Reset
1 USB 2
Wait 2 minutes for both devices to fully power
up, then press the Pairing button for 3 seconds
and release. LED will blink GREEN.
Use the Router
QR code to connect
mobile devices
Off load your Wi-Fi Networks
by using the Ethernet ports
2 on the Router or Extender
Ethernet LAN
Pairing Reset Wi-Fi Standby
Reset
3 Seconds 3-10 Seconds <5 Seconds
= G.hn Pair = Reboot = enable
+5 Seconds 10 Seconds <5 Seconds
= WPS Initiated = Factory Default = disable
+15 Seconds
= G.hn unpair
SBR-AC3200P
Wi-Fi Router with
®

Quick Start

Guide
Green
Front
View
1 2
SBX-1000P
or
SBX-AC1200P
Wi-Fi Hotspot
Excellent
Good
Fair
Solid color LED is
3b
Successful Pairing
Reset
3s
Now, press the Pairing
button for 3 seconds and
release. LED will blink GREEN.
label's
Online
Gaming
Smart TV

Support Options

How to Video
https://www.youtube.com/
arris.com/consumers
user/ARRISmarketing/featured