Regulatory Notes - Extech Instruments 2000i Series User Manual

FCC Part 15 Class B
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try too correct the interference by one or more of the
following measures:
Ÿ
Reorient or relocate the receiving antenna.
Ÿ
Increase the separation between the equipment and the receiver.
Ÿ
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Ÿ
Consult the dealer or an experienced radio/TV technician for help.
Warranty
This printer is warranted by Extech Data Systems to be free of defects in parts and workmanship
for a period of one year from date of shipment. This warranty does not apply to defects resulting
from action of the user such as misuse, improper wiring, operation outside of specification,
improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any
implied warranties of merchantability or fitness for a specific purpose and will not be liable for
any direct, indirect, special, incidental or consequential damages. Extech's total liability is limited
to the repair or replacement of the product. The warranty set forth above is inclusive and no other
warranty, whether written or oral is expressed or implied.
Warranty Service
A Return Authorization number must be issued before a unit is returned to Extech for repair. The
customer is responsible for ensuring proper packing to prevent damage in transit. Once a unit has
been properly returned to Extech, it will be repaired (estimates are provided first if the repair cost
is estimated above $100.00) and returned via UPS ground. The customer may elect a faster mode
of transport at their cost.
13

Regulatory Notes