Electrical Connections - Revolutions Solaris Owner's Manual

Electrical Connections

Place the receiver on top of the downrod assembly as shown (Fig, 6A).
Four wires are connected to the top of the fan (Fig. 6B).
Black: "Hot" Power for the fan
Blue: "Hot" Power for the Light
White: "Common" For the fan and light
Green: Ground Wire
1. Connect the 3 grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling,
downrod, and ceiling bracket.
2. Connect the yellow wire from the receiver to the black wire from the fan.
3. Connect the blue wire (Light HOT) from the receiver to the blue wire from the fan.
4. Connect the black (Fan HOT) wire from the ceiling to the black wire from the receiver.
5. Connect the white (Common) wire from the ceiling to both the white wire from the receiver and the
white wire from the fan.
6. Tuck your completed wiring back up into the electrical box.
Fig. 6B
From Ceiling
Green/Yellow
From
Stripe
Bracket
From Fan
Note: To connect the wires, hold the bare metal leads together and place a wire connector
over them, then twist clockwise until tight.
Fig. 6A
From Receiver
From Fan
ME008-01
From Ceiling
From Receiver
8
11/11/2014
From
White
Fan