Unpacking Your Fan - Revolutions Solaris Owner's Manual

Unpacking Your Fan

1. Unpack your fan and check the contents. Do not discard the box. If warranty replacement or repair is
ever necessary, the fan should be returned in its original packaging. Remove all parts and hardware.
Do not lay the motor housing on its side; the decorative casing may shift.
2. Examine all parts. You should have the following:
1. Mounting Bracket
2. Canopy
3. Downrod
4. Fan housing, Motor, and Switch Housing
9. Parts Pack Containing:
a. Blade attachment hardware (blade screws, nut, and washers for each blade)
b. Pull Chain/Fob
c. Mounting bracket hardware (extra screw and washer, wire nut, extra motor
screw, and washer)
Note: Some Revolutions fan models will have slightly different parts than shown here, depending upon the
model. Basic installation procedures are similar for all fan models.
5. Light Kit
6. Blade Arms
7. Blades
8. Balance Kit
4
ME008-01 11/11/2014