MV Agusta F3 User Manual page 142

4.4.6. "QUICK SHIFT" mode *
Press "SET" in order to access to "QUICK SHIFT"
mode. The display shows the current activation state of
the "quick shift" function of the gear change.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press the "OK" button for less than three seconds;
the activation caption of the "quick shift" function begins
to flash.
By pressing the "OK" button for less than three
seconds, the caption toggles from "OFF" to "ON" and
inversely.
Press "SET" to confirm the selected "quick shift" acti-
vation state.
(*): This function is present only on certain models;
available in aftermarket on all models
OPERATION
- 53 -
4
4