Training Mode - Sharp XE-A303 Instruction Manual

TRAINING MODE

The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to "Training clerk specification for training mode" in "ADVANCED FUNCTION PROGRAMMING" in
page 77.
The training operation is valid only in REG, MGR and
The corresponding clerk memory is only updated in the training mode.
Key operation example
A clerk set in training
Part
mode.
L
20
∞
1000
@
3
£
A
1 2 3
FOR THE MANAGER
Part Part
Print
83