Thermal Printer Density; Language Selection; Training Clerk Specification For Training Mode - Sharp XE-A301 Instruction Manual

A301_3(En) 03.4.24 7:40 PM

Thermal printer density

s 50 @
* By default, 50 is set. To make the print darker, set a larger number, and to make the print lighter, set a smaller
number.
Key operation example

Language selection

s
*Language: 0: English
By default, English is set.
Key operation example
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to page 40), which you programmed, will be reset to the default settings. The language
selection must be made therefore before programming clerk names, logo messages and function
texts.

Training clerk specification for training mode

For the details of clerk training, please refer to "TRAINING MODE" on page 57.
s 86 @
Key operation example
52
Page 52
s @
50
s A
70
88
1: German 2: French
s @
88
A
1
s @
86
s A
4
To set "0"
* s
Printer density
(00-99)
Print
To set "0"
@ *Language A
(0-3)
3: Spanish
Print
To cancel
s
Clerk number
(1 to 20)
Print
A
A