Sharp XE-A303 Instruction Manual page 87

Mode switch position
Item
OPX/Z X1/Z1
Total in drawer
--
report
Individual clerk
report
X, Z
Full clerk report
--
Hourly report
--
(full)
Hourly report
--
(by range)
Daily net sales
--
report
• When both sales quantities and sales amounts are zero, printing is skipped. If you do not want to skip,
change the programming. (Refer to "Print format" of "Various Function Selection Programming 1".)
• "X" represents read symbol and "Z" represents reset symbol in the reports.
• To stop reading and resetting the PLU sales report, turn the mode switch to the MGR position.
The data will not be erased when you reset.
• The drawer does not open when you take X/Z reports.
The drawer can be opened by pressing the
• When printing is performed continuously, the printing may be intermitted several seconds. After
the intermission, the printing will be restarted.
X2/Z2
X1 X2 Reading:
Reading:
-- --
(The report of the current clerk)
X1, Z1 X2, Z2 Reading:
-- Reading:
X1, Z1
--
X1 Reading: Start time
--
X2, Z2 Reading:
1 2
Part Part Part
Key operation
2 A
L
Resetting:
L
Resetting:
s
Resetting:
@
(hour)
s
Resetting:
A
key to remove the till after closing your business.
3
FOR THE MANAGER
L
P
P L
s
P
s
End time
(hour)
s
P
85