CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very
•
carefully.
Assemble and operate the scale per the enclosed user instructions.
•
Do not transport the scale with any weight on the platform.
•
Do not exceed weight limit of 1000 lb / 454 kg for this scale.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation
•
according to the procedure described in this manual.
Do not use in the presence of flammable or explosive materials.
•
For accurate weighing, if the "Lo bAtt" indicator activates, replace the
•
batteries or switch to the AC adapter as soon as possible.
adapter not available on 3001KL-AMC model.
When replacing / inserting batteries, be sure to use all new batteries.
•
To prevent patient injury, the patient must be attended throughout the
•
entire weighing event.
Patient should wear socks or other form of lightweight foot covering during weighing
•
event.
Using the Scale with the Optional AC Adapter
Note: Use of AC adapter not available on 3001KL-AMC model.
If applicable, operate this scale exclusively with the AC adapter provided by
•
Health o meter
warranty, and can pose a serious safety hazard.
Operating this scale at voltages and frequencies other than specified can
•
damage the equipment and will void the warranty.
Prior to using this scale, inspect the AC adapter cord for cracking /
•
fraying, or for broken / bent plug prongs.
Prior to using this scale, ensure that the AC adapter is plugged into an
•
outlet with the rated voltage appropriate for operation.
Ensure that the AC adapter outlet is wired to a circuit breaker or other
•
protected power source.
Unplug the AC adapter, and carefully store both the adapter and adapter
•
cord before moving the scale.
Ensure that the AC adapter and scale do not come in contact with liquids,
•
excessive temperature, or excessive humidity.
If the scale is being connected to another medical device, the power
•
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power.
®
Professional. Use of an unspecified adapter will void the
Note: Use of AC
3