Unit Of Measurement (Uom) Configuration - Health O Meter 3001KL-AM User Instructions

QUICK START / OPERATING INSTRUCTIONS (CONT)
6. The scale will prompt you to enter the patient's height. Use the keypad ▲ and ►
buttons to enter the patient's height.
Note: When weighing in pounds, the height is displayed in inches. When weighing in
kilograms, the height is displayed in centimeters.
7. Once height is keyed in, press the ENTER button.
8. The display will show the patient's BMI.
9. Press the ENTER button to return to the normal weighing mode of the scale.

UNIT OF MEASUREMENT (UOM) CONFIGURATION

The scale ships from the factory locked in "KG" mode. In this configuration, the scale
will power up and exclusively display the patient's weight in the "KG" Unit of
Measurement (UOM). Depressing the UNIT button will not change the UOM.
1. To change the UOM, power up the scale and allow scale to display "0.0 KG". Press
and hold the UNIT button for about 30 seconds. The "KG" UOM will begin to flash and
display will beep. Release the UNIT button.
2. The UNIT button is now active. Depressing the UNIT button will change the UOM
from KG to LB and back to KG.
3. To re-configure the scale and lock back into "KG" mode, press the UNIT button and
set the display to "0.0 KG". Hold and press the UNIT button for about 30 seconds. The
"KG" UOM will flash and scale will beep. Release the UNIT button. The UNIT button is
now disabled, and the scale is now locked in "KG" mode.
13