Health O Meter 3001KL-AM User Instructions page 10

QUICK START / OPERATING INSTRUCTIONS (CONT)
Refer to Figure 4 for Button Locations
Weighing a Patient
1. Make sure there is no object on the weighing platform.
2. Press the ON/OFF button to power the scale on.
3. Wait until the "0.0" LB or "0.0" KG appears on the display.
4. Ask the patient to step on the scale. The scale will begin to display weight information
and will lock on the patient's weight when the stable weight of the patient is determined.
Depending on the movement of the patient on the scale, it may take several seconds for
the scale to lock onto the weight.
5. The weight may be held on the display by pressing the HOLD/RELEASE button. To
release, press the HOLD/RELEASE button again.
6. After the weight measurement has been taken and is recorded, have the patient step
off the scale. Press the ON/OFF button to power the scale off.
Weight Recall
1. The last weight reading on the scale can be recalled by pressing the RECALL button.
To clear the display of the recalled weight, press the ENTER button.
Note: Clearing the recalled weight from the display will not clear the recalled weight
from memory. The recalled weight will remain in memory until another weight is
obtained.
10