Yamaha RX-A1010 Owner's Manual page 92

■
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker
sounds. When connecting headphones, you can adjust high-frequency range and low-
frequency range of sounds output from headphones.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0db ~ Bypass (Bypass) ~ +6.0dB *0.5dB steps
Default
Bypass (Bypass)
• If you set the balance extremely off, sounds may not match those from other channels well.
Adjusting with the front panel controls
a
Press TONE/BALANCE to select "Treble" or "Bass".
b
Press PROGRAM to make an adjustment.
■
Adaptive DRC (Adaptive DRC)
Sets whether dynamic range (from maximum to minimum) is adjusted automatically in
conjunction with adjusting the volume level. When it is set to "On", it is useful for
listening to playback at low volume at night.
Settings
On (On) Adjusts the dynamic range automatically.
Off (Off) (default) Does not adjust the dynamic range automatically.
If "On" is selected," the dynamic range becomes narrow at a low volume, and becomes
wide at a high volume.
Volume: low Volume: high
On
On
Off
Off
Input level Input level
■
CINEMA DSP 3D Mode (CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D. If this function is set to "On", CINEMA DSP 3D
functions according to the selected sound programs (except 2ch Stereo and 7ch
Stereo).
Settings
On (On) (default) Enables CINEMA DSP 3D.
Off (Off) Disables CINEMA DSP 3D.
■
Dialogue Lift (Dialog Lift)
Adjusts the vertical position of center sound such as dialogues when front presence
speakers are used. If dialogues are heard from a position lower than the TV screen,
adjust this setting to raise the position.
Setting range
0~5 (higher raises the position)
Default
0
Ideal position
91
En