Yamaha RX-A1010 Owner's Manual page 116

❑ Short Message
Selects whether to display short messages on the TV screen when this unit is operated
(input selection, volume adjustment, etc).
Settings
On (default) Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
❑ Wall Paper
Selects a wall paper displayed on the TV.
Settings
Displays the selected image on the TV screen when there
Picture1, Picture2, Picture3
is no video signal.
Displays a gray background on the TV screen when there
Gray
is no video signal.
■
Trigger Output1, Trigger Output2
Sets the TRIGGER OUT 1~2 jacks to function synchronized with power status of each
zone or input switching.
❑ Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions synchronized with the power status of the zone
Power (default)
specified with "Target Zone."
The TRIGGER OUT jack functions synchronized with the input switching in
the zone specified with "Target Zone."
Source
Electronic signal is transmitted according to the setting made in "Target
Source."
Select this to manually switch the output level for electronic signal transmission with
Manual
"Manual."
❑ Target Zone
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
Settings
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with power status of the main zone.
Main
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with input switching in the main zone.
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with power status of Zone2.
Zone2
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with input switching in Zone2.
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with power status of the main zone or Zone2.
All (default)
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with input switching in the main zone or Zone2.
❑ Target Source
Specifies the output level of the electronic signal transmitted with each input switching
when "Trigger Mode" is set to "Source".
Choices
AV1~7, V-AUX, AUDIO1~4, PHONO, TUNER, Sirius Satellite Radio, (network sources), USB,
DOCK, MULTI CH
Settings
Stops the electronic signal transmission when you switch to the input source
Low
specified in this option.
Transmits the electronic signal when you switch to the input source
High (default)
specified in this option.
❑ Manual
Switches the output level for electronic signal transmission manually when "Trigger
Mode" is set to "Manual". This setting can also be used to confirm proper function of
the external component connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High (default) Transmits the electronic signal.
115
En