Yamaha RX-A1010 Owner's Manual page 104

Menu Item
IP Address
Network Network Standby
MAC Address Filter
Volume
Max Volume
Zone2 Set
Initial Volume
Mono
Multi Zone
Monitor Out Assign
Party Mode Set
Zone Scene Rename
Zone Rename
Auto Power Down
Input Assignment
Front Panel Display
Display Set
Short Message
Function Wall Paper
Trigger Mode
Target Zone
Trigger Output1
Trigger Output2
Target Source
Manual
Memory Guard
Language
Function
Configures the network parameters (IP address, etc).
Selects whether or not to turn on this unit by the command from other network devices.
Sets the MAC address filter to limit access to this unit from other network devices.
Enables/disables volume adjustments for Zone2 output.
Sets the Zone2 maximum volume so that sound is not too loud.
Sets the Zone2 initial volume for when this unit is turned on.
Switches between stereo and monaural for Zone2 output.
Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.
Enables/disables switching to the party mode.
Changes the scene names (for Zone2) displayed on the front display or TV screen.
Changes the zone names displayed on the front display or TV screen.
Sets the amount of time for auto-standby.
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
Dimmer Adjusts the brightness of the front display.
Scroll Sets the scrolling manner of the front display.
Selects whether to display short messages on the TV screen when this unit is operated.
Selects a wall paper displayed on the TV.
Specifies the condition for the TRIGGER OUT jack to function.
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
Specifies the output level of the electronic signal transmitted with each input switching.
Switches the output level for electronic signal transmission manually.
Prevents accidental changes to the settings.
Select an on-screen menu language.
Page
111
111
111
112
112
112
112
112
112
113
113
114
114
114
114
115
115
115
115
115
115
116
116
103
En