Cobra BRIDGE 4100 User Instructions page 19

4 - BASIC FUCTIONS
Foreword
As the functional characteristics of this system can be customized, the installer must mark the ones he has activated in this
manual. The standard factory set - up is shown by the dark squares.
4.1 - Controlled windows lift (confort)
Keep button "A" pressed, when arming the allarm. The windows
close in a "controlled mode". The windows will stop closing if the
button is release.
4.2 - Window radio control activation
If the window radio control output function is activated (page 5
line 8). When this function is activated, the windows will rise with
a 1 s delay in relation to door locking.
4.3 - Autolock - Automatic door locking mode
Automatically locks the doors at a preset speed or 20 s after
turned on the ignition. In both cases, the doors are automatically
unlocked when the ignition is turned off.
4.4 - Automatic door locking mode selection
p
Automatically locks the doors, depending on the speed or time.
BRIDGE 4100 - Basic function
06DE2142E.pmd 19
4.5 - Automatic alarm arming
The system will arm without locking the doors 2 min. after the
ignition is switched off and the last door closed. The system will
not arm if the ignition is switched on within the 2 min. period.
4.6 - Automatic immobilizer arming
The engine immobiliser will automatically activate 2 min. after
the ignition is switched off. The LED will flash. The engine will
be immobilised. To restore motor block of the system, press key
'B' of the remote.
4.7 - Immobilizer alarm
An alarm function can be added to the immobiliser automatic
arming. If enabled, an alarm is triggered 25 sec after the
instrument panel has been turned ON.
4.8 - Anti-distraction motor - block
After disarming with the radio control, there is a 40 s delay
within which the immobiliser rearms unless the ignition is
switched on.
11/02/2008, 11.15
19