Ubee DDW36C User Manual page 80

Ubee Interactive
Wireless Channel
Apply
Restore Wireless Defaults
Scan Wireless APs
9.2.1 Scanning for Wireless Access Points (APs)
You can search for nearby wireless access points and display the results in a new
window.
Steps
To search for wireless access points:
1. Click Scan Wireless APs at the bottom of the Wireless Radio screen. Results are
displayed in a new window.
2. Click Refresh to update the results.
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015
Label
Set to Auto by default, the Wireless Channel selects a specific
channel to deploy the wireless network. This allows you to set
the operating frequency/channel depending on your particular
region. Channel selection can have an impact on wireless
networking performance. For more information, refer to
Selecting a Wireless Channel on page
The current channel is displayed as well as the interference
level.
Saves all screen changes when clicked.
Restores the factory default settings for wireless
configurations when clicked.
Scans for other wireless access points and displays channel,
encryption, SSID, RSSI levels, and other information. See the
section below for more information.
Using the Wireless Radio Option
Description
91.
76