Using The Mac Filtering Option - Ubee DDW36C User Manual

Ubee Interactive
Start Address
End Address
Enabled
Apply
6.3

Using the MAC Filtering Option

The MAC Filtering option allows you to filter MAC addresses to block Internet traffic from
specific network devices on the LAN. MAC filtering establishes a list and any host on this
list is not able to access the network through the DDW36C.
Steps
To filter MAC addresses:
1. Note the MAC addresses of the devices that you want to deny Internet access.
Be sure all devices to which you potentially deny Internet access are connected to the
DDW36C network.
2. Click Advanced from the main menu.
3. Click MAC Filtering from the left side menu.
4. Enter the MAC address to block in the text box to the left of the Add MAC Address
button.
5. Click the Add MAC Address button. The MAC address is displayed in the filtered
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015
Label
Defines the starting IP address to block.
Defines the ending IP address to block.
Activates the rule when enabled is checked.
Saves changes.

Using the MAC Filtering Option

Description
51