Table of Contents
Advertisement
AS S EM BLY IN S TR UC T I O NS /
OP E R AT IN G I NST R UC T I O N S
22. WARNING: This heater is not equipped with a
device to control the room temperature. Do not use
this heater in small rooms when they are occupied by
persons not capable of leaving the room on their
own, unless constant supervision is provided.
SAVE THESE
INSTRUCTIONS
TECHNICAL SPECIFICATIONS
• Amps: 12.5
• Wattage: 1500W (+5% -10%)
• Working voltage: 120V AC/60Hz
BASE ASSEMBLY
Insert Base (H) into the bottom of the Base Mount (J)
which is attached to the bottom of the Grill.
(see Figure 1)
WALL MOUNTING ASSEMBLY
(see Figure 2-4)
IMPORTANT: Before drilling into any wall ensure no
electrical cables are present in the area.
NOTE: Due to the multitude of potential mounting
surfaces, mounting screws are not included with this
product. Please seek professional assistance or visit your
local hardware store to determine which type of screw is
best for your particular wall.
1. Remove Base (H) from the bottom of the Base
Mount.
2. Remove Base Mount from the bottom of the Grill (I)
by removing the two securing screws. (Refer to
Figure 2)
3. Secure the Mounting Bracket to the wall. (Refer to
Figure 3)
4. Hang the Heater Unit on the Mounting Bracket using
the hooks located on the back of the unit. (Refer to
Figure 4)
Figure 5
A
I
J
H
A. Left End Cap
B. Rear Housing
C. Right End Cap
D. Display
E. Mode indicator
lights
F. Mode Button/
Adjustment
OPERATING INSTRUCTIONS
Turning the unit on/off and setting the
Digital thermostat:
1. Plug unit into wall socket.
2. Press "mode" Button:
• 1st = LO; runs continuously on Low.
• 2nd = HI; runs continuously on High.
B
C
D
E
F
G
G. Thermostat
Adjustment
H. Base
I. Grill
J. Base Mount
Advertisement
Table of Contents
